Servos

RoverWing servo connectors

RoverWing provides four servo connections. They can be used for any hobby servo which is controlled by standard PWM signal (500 μs - 2500 μs pulse duration) and 5V power.

Note

The total current available for servos and NeoPixel LEDs is about 3.5A. This is sufficient for most applications, but might not be enough for large loads. For example, for a popular HS485HB standard size servo, no-load current draw is 0.3A, but the stall draw can be as high as 1.2A. Note also that digital servos usually are much more power-hungry than analog servos.

If you need more power for your servos, we recommend using goBILDA Servo Power Node.